Pressure Vessel
From NewMarsWiki
Revision as of 23:50, 8 August 2009 by John Creighton (talk | contribs) (New page: == Wall Thickness == One requirement for the pressure vessel is for the walls to be strong enough to withstand the internal pressure. If you take a cross section of the pressure that is p...)
Wall Thickness
One requirement for the pressure vessel is for the walls to be strong enough to withstand the internal pressure. If you take a cross section of the pressure that is perpendicular to the walls, then the preasure times the area, must equal the tensile strength of the material multiplied by the circumfrance of the cross section, multiplied by the wall thickness. Including a factor of safety this becomes:
<math>F_sPA=\sigma C w </math>
